Boss Buck 1200 lb Protein Feeder - Single Leg System

$899.99
$899.99
Shipping calculated at checkout.
SKU: BB1BF12P
Description

The 1200lb. capacity hopper has a thick wall of HDPE UV Protected plastic that will not rot, rust or leak! Our 1200lb. capacity bulk feeder is the only adjustable height bulk deer feeder on the market today. By moving the stop brackets on the leg channels you can switch this versatile feeder from a 40″ protein feed height, to an eye-level control box height for feeding corn through the optional Automatic Conversion System.

With our patented protein/gravity Head you get the most moisture resistant free feeding system available.  The 4-way feeder head features a 10 degree of angle and 1″ overhang on the 4″ I.D. / 8″ long feed ports. Each feed port has a drain hole to disperse any water that enters the tip of the feed port. Our patented design features an internal cone that dispenses the feed evenly to all four feed ports. The 4-way inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your favorite type of critter food. Our double-walled hatch lid tops this unit off in style and function. Built oversized, this lid allows the hopper system to breathe, thus eliminating condensation while achieving ambient temperature faster than steel or fiberglass feeders.

The only adjustable height 1,200 lb capacity bulk feeder on the market today!  Our patented design dispenses feed evenly to all four feed ports and the 4-way inner sleeve allows the user to control feed flow

  • Holds 1,200 lbs of corn (approximately)
  • Holds 1,000 lbs of Large Protein Pellets (approximately)
  • Height adjustable from 108″ to 132″
  • Hopper is 61″ tall x 43-1/2″ wide
  • Hopper weight 60lbs.
  • Hatch lid is 3″ deep
  • Constructed from thick wall HDPE UV-protected plastic
  • Legs are 105″ 1-1/2″ and constructed of 12 gauge galvanized steel
  • Lid designed with a loose fit to allow proper ventilation
  • 4-Way Protein feed tube has 5″ ports with 4″ I.D. openings for a deer’s muzzle
  • Protein 4-way feeding height 40″
  • All galvanized hardware
  • Feeder dimensions: 43.5 x 43.5 x 61
  • Feed tubes have 10° Angle
  • Feed tubes have 1″ overlap on top of each Port
  • Feed ports are 8″ long and 4″ I.D.
  • Each Port has a drain hole