Favorite Rods Summit Series

Favorite RodsSKU: SMTC-621M

Model: SMTC-621 M
Price:
Sale price$349.99
Stock:
In stock (5 units), ready to be shipped

Description

Description

Summit is the star of the show because it is the first of its kind! The Summit is the most advanced, surgical fishing rod ever available in the U.S. market. This is the first rod to be constructed in one solid piece: no handle, no rod seat - it's all one! The Summit also holds the record for lightest weight in the spinning and casting business due to our new Graphite and Kevlar cloth technology.

 

Model Length Pieces Lure Weight Line Weight Power Action Weight (oz)
Casting Rods              
SMTC-621 M 6'2" 1 1/4-5/8 10-16 Medium Fast 2.7
SMTC-721 MHB 7'2" 1 3/8-1 12-20 Med Hvy X-Fast 3.3
SMTC-681 MH 6'8" 1 1/4-3/4 12-20 Med Hvy X-Fast 2.8
SMTC-721 EXH 7'2" 1 3/8-1 12-20 Extra Hvy X-Fast 4.2
               
Spinning Rods              
SMT-601 UL 6' 1 1/32 - 1/8 2-4 Ultra Light Slow 1.9
SMT-621 M 6'2" 1 1/4 - 3/4 6-12 Medium Moderate 2.5
SMT-681 M 6'8" 1 1/4 - 3/4 6-12 Medium Mod Fast 3.0
SMT-610 L 6'10" 1 1/32 - 1/8 2-4 Light Slow 2.2
SMT-721 H 7'2" 1 3/8 - 1 10-17 heavy Fast 3.6

 

Warranty

Every new Favorite rod is covered by a Limited Original Owner Lifetime Warranty. This warranty is limited to repair and replacement of the rod and does not cover direct, indirect, consequential, incidental or any other type of damage resulting from the use of the product. This warranty does not cover fire, theft, loss, intentional breakage, modification or customization of the finished rod. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

Materials

Toray 46T – Japan manufacturer Toray prepreg. Modulus 46 TON (~68 Msi)

Fuji Titanium - Lighter and Stronger

K-R Concept - The new concept of placing the rings, which uses a new type of rings KL-H, was introduced by Fuji in 2012. The basic principle of the new concept is the so-called fast cone principle, which consists of only three rings of small diameter on high legs. This allows you to quickly put down the fluctuations of the fishing line and prevents it from rubbing against the rod blank in front of the inlet ring. In addition, the K-R concept assumes a reduction in the total mass of rings and unloading of the rod tip through the use of small running guides. Using the K-R concept improves a number of rod specifications:

  • Reduction in weight
  • Improvement in the balance
  • Increase in casting distance
  • Increase in the accuracy of casting.

Fuji Torzite - This is the last word in the technological evolvement and engineering from Fuji, these guides are made from a high strength material that is carefully polished, which leads to the TORZITE guides beginning much thinner and lighter in comparison with SiC guides of the same size . Thanks to its slim form, the inner diameter of the TORZITE guides is 15% wider than the SiC guides of the same size. This means that now you can reduce the weight of guides on the rod up to 20-30%! Weight reduction of the guides decreases rod tip load, and add sensitivity to the rod top. High strength ceramic material TORZITE has the same level of durability and strength, as SiC material despite of the fact that TORZITE guides are much thinner than SiC ones. Chances to break the guides TORZITE from an accidental impact or fall is much lower. TORZITE guides surface is carefully polished, this reduces friction and allows enhancing distance of every cast. Surface smoothness of guides also reduces the contact pressure and friction, prolonging the “life” of the fishing line. As a premium product , Fuji TORZITE guides are only available in a titanium frame. To indicate the status of high quality manufacture, all of the Fuji TORZITE guides are marked with a laser.

IGRIP - The iGrip patented technology which raises the rod to a higher and new functionality level. The essence of this technology is that the grip and blank form a single unit. This was achieved thanks to several advantages:  Weight reduction, due to the fact that the design of the grip doesn’t use any additional arbor or carbon tubes under the reel seat, now it is mounted directly on the blank.

MLS SLIM - The usage of a special different modulus carbon layer combination and different fiber directions allow us to create very thin and “slim” blanks without losing rod stiffness which we use to build L and UL class rods.

OCTA CORE GRID - The usage of a special different modulus carbon layer combination and different fiber directions allow us to create very thin and “slim” blanks without losing rod stiffness which we use to build L and UL class rods.

 

 

Estimate shipping

You may also like

Recently viewed